Tube measurements


Hi there,

I'm working on a 2.5 from scratch, and the Dozuki instructions are more oriented to those building from a kit. I just want to make sure that I'm using the correct dimensions for cutting the various tubes, as what's on the 2.5 BOM is a little different from even fairly recent information in the forums or in the instructions for 2.4:

4 inch e-tube: 180mm
3.25 inch shroud: 3 lengths @ 22mm each
1.25 inch battery tubes: 2 lengths @ 233mm each

Feedback appreciated. Thanks!


Hello Rob,

I just measured parts at the office and everything sounds good except if you go 25mm on the shroud then it will cover the propellers better. That is based on measurements I took from a 2.6 rov. On a 2.5 ROV people are thinking they glued their shrouds on wrong because the motors stick out a little bit but that's just how it goes.