Power wire connection to topside communications box

#1

Hi all,

What is the proper method to get the power wires to hold firmly in place in the topside communications box? I’m having issues with the wire staying in — I can’t tell how those orange pieces are moved in the instructions.

Best,
Jory Fleming

#2

@joryfleming,
I assume that you are talking about the tether wires?
There is a small slot in the face of the orange finger and I use a small screw driver to gently lift the finger up using the slot and insert the wire into the hole under the finger. Don’t lift the finger too high and make sure that the stripped end of the wire goes into the hole in the metal piece at the back of the hole in the front under each orange finger.
Regards,
TCIII AVD

#3

Thanks! Screw-driver did the trick.