Possible Design Modification going forward?



We were having issues with our unit and trouble shooting involved unplugging the onboard Ethernet plug on the beaglebone and plugging in another cable to try and isolate a problem.

In an attempt not to disturb too much I tried to do this without removing the beaglebone board. I managed to snap off the Acrylic arm on the side of the assembly. I have attached a Picture.

Would it be possible to change the design on that part going forward to include an opening in the the part to allow for manipulating the plug ? I imagine it would mean changing its shape somewhat, but would make it easier to play with if you need to unplug and replug the cable.


131-IMG_14291.JPG (2.92 MB)


Definitely, that's on the list for 2.7