New USB/ Ethernet Box


Hey Guys,

So a couple of days ago I accidentally broke the USB adapter off of its circuit board, so I had to tear the whole acrylic box apart and resolder it. For the last couple days I have just been dealing with the loose wire mess, but today I decided to make a box for it. This is what I came up with. Now you call pull all of the electronics out and work on it with just cutting a ziptie. Also note that the USB is now superglued to the ethernet port to give it some rigidity. Overall it took me about 20 min and its a super easy build for anyone with a similar issue.

1008-photo1.JPG (517 KB) 1009-photo2.JPG (516 KB) 1010-photo3.JPG (484 KB)


Nice! ...Seems to work well!