More changes to design


#1

I did not like the design of the ends for the battery tubes. So copied the way the electronics tube is assembled using o-rings. Made autocad drawings for ends and used laser to cut plexiglass and build ends. see attached

I used 1/8 inch pipe plugs with vents instead the 1 mL syringe. The hole size was perfect to tap for 1/8 inch pipe. would show picture but am limited to 3

I need to be able to add more than 3 pictures!

2000-BATTERYENDCAPGLUE1.jpg (194 KB) 2001-BATTERYENDCAPGLUE3.jpg (133 KB) 2002-BATTERYENDCAPREMOVABLE3.jpg (119 KB)

#2

Pictures, you can upload them inline with the text.


#3

Your 3 build posts are awesome! I love seeing them as you go along.