Instructions for terminating the wiring harness into the plug


#1

Hi,

Got my 2.5 kit a few weeks ago. Been following the 2.5 build instructions. I am nearing the end and noticed that I did not see where the wiring harness is terminated in the plug that plugs into the controller board. Is there a separate pin out diagram somewhere that shows which wire from the harness goes to which pin in plus?

Thanks

Pat


#2

You can find it at Dozuki:

http://openrov.dozuki.com/Guide/How+to+Build+OpenROV+v2.5/2/24

Step 70, third image, or directly:

http://d17kynu4zpq5hy.cloudfront.net/igi/openrov/1E5GMiQxWnQIaFNa.l...

-Stefan


#3

Great!

Thanks

Pat