Homeplug adapter board


I am attaching the home adapter board to the Controller board and the pins are very loose not sure if I should make them shorter or if there is another way to make sure the pins are snug.

Any input would be appreciated.



Can you post a picture of your homeplug adapter pins for comparison to mine? The beagle bone should keep the homeplug from going anywhere but my pins feel pretty snug. The servo lead and reset button lead coming off the middle ESC can push up against the homeplug a bit too and help keep it snug.


Thanks Mathew , I evened up the height of the pins and it snugged up a bit then when I attached the beagle bone I saw what you meant.

Tx again


Great, glad you are off and running!