Help Setting Up

software

#1

I update firmware from the “Settings” tab - I don;t understand your comment the “SD card should be in the BBB” I would not be able to update the firmware if that was the case, as it only allowed the uploading from the SD card in the card reader and not the desktop or any other location.

Lights are still flashing.

Please advise


#2

The firmware can upload from either the SD card in the SD card slot on the BBB or the eMMC on the BBB, depending if you are using a boot image or a flash image. If you are using a flash image you should remove the SD card after the BBB has finished updating.
The ROV lights may flash if your PC is slow at sending a heartbeat signal from the browser to the ROV. Also if your PC does not connect to the ROV. You can disable this feature in cloud9.