Electrical housing change


I changed the ends for my electrical housing. One end is now made up of two plexi 1/4 inch thick disks glued into the 4 inch tube. I have an 1/8 inch pipe plug threaded into it so you can release the pressure when assembling it. The last step in assembling the electronics is to screw in the brass plug. The other end of the electronics assembly I added connectors and my sensors for temperature and pressure.

1399-elechousinggluedend2.jpg (250 KB) 1400-elechousing4holes.jpg (193 KB) 1401-elechousinggluedend.jpg (161 KB)