All 3 ESC Glow and can't program them


#1

Hello Everyone,

Just wondering but when I turn it on (got the whole robot hooked to a 12 V power supply) everything is working and the ESC are constantly glowing red but when I try to turn one off it doesn't.

THe only time they turn off is when I turn the vertical one off. Also I can't seem to get into the programming stage by holding down the red button. Nothing happens.

Does anyone know what might be the problem and how to fix it?

Thank you very much in advance,

-Pavel.A

1268-IMG_20130820_160800.jpg (99.1 KB)

#2

I got the image attached of how everything is hooked up.

I made the mistake of putting everything together before programming and calibrating the ESC.


#3

Hi Pavel,

I have noticed that if only one esc is on, they will be all functional.

To program the ESC, you shall disconnect it from the board.

I hope it helps.

Kind regards,

Benoit


#4

Awesome the ESC were calbrated.

Now when I turn everything on one ESC is constantly glowing green and the other two red and the motors won't spin :/

Might you know why?

Thank you very much already for your help


#5

For some reason when I try callibrating the ESC's only one motor always responds for all 3 ESC