3D Printed Modifications and extras


#1

I’ve Recently been playing with 3d prints to add attachments to my ROV fleet (2s a fleet right?), and thought id share them.

Such as a 3D printed bait box https://www.youmagine.com/designs/openrov-bait-box
and the Gun rail attachment system http://www.thingiverse.com/thing:1025771

These are great!!


UK OpenROVers / ROV enthusiasts - meetup?
#2

More recently ive been playing with propellers and if 3d printed ones are effective and they are ! ive tested them and results are on my twitter https://twitter.com/jonny_teague/status/692006790565855232

The file I used is http://www.thingiverse.com/thing:393216 and set it to be 60mm

Anywho if I see any more awesome prints ill share it all


#3

I have recently released a remix of a file for a Niskin sampling Device for OpenROV platform. found at http://www.thingiverse.com/thing:1455076. https://twitter.com/jonny_teague/status/715499131805036544

This is a remix to fit an OpenROV Payload Rail System from PaulMarineRPS http://www.thingiverse.com/thing:1025771. The attachments to the Niksin areGo Pro Picatinny Rail Mounts from lazerusrm http://www.thingiverse.com/thing:103878.

The original design for the Niskin is from AndrewThaler found at https://www.youmagine.com/designs/niskin3d-water-sampler. I modified it and changed some parts to make it work for myself. I followed his in instructions on http://www.southernfriedscience.com/?p=18730


#4

hi,
great stuff, i gonna try to print some in glow in the dark abs.
isn t it pulling t much amps on esc?


#5

Nice I like it, I’ve now got a set of pink, gold and orange…I have not problem with it so far doesn’t appear to have a negative effect that I have seen as they are the same size roughly as the ‘official’ ones and roughly similar weight

The only thing to be careful of it drilling the hole dead centre, the mark on the propeller sometimes is a little off the middle…that can cause issues


#6

Almost forgot about these beauties http://www.thingiverse.com/thing:120663.
Great little keyrings

I remixed them to be given away at conferences and such:


#7

Originals are at: http://www.thingiverse.com/thing:120663


#8

I’ve found these on my travels though the internet, they are glare shields for the 2.8 system.


#9

Heres my new remix its a rail mount for payloads


#10

I now have a baitbox out to connect to the rail system http://www.thingiverse.com/thing:1672477