1st attempt at power up


#1

Hi all,

I just went through my first attempt at power-up on ROV 2.6. The only light that comes on the topside adapter is the green power light, and its blinking at approximately 1 second intervals. Further, no light is observed on the controller board. What may be some reasons for this? Any help or suggestions would be greatly appreciated.

Thanks!

Charlie


#2

First step is to carefully check over all the wiring, especially the DB-25 connector in the ROV. If you've got the tether wired to the wrong pins, then the ROV won't power up when you apply power to the topside box.

-W