ROV Builders   Electronics


Topic Replies Activity
2.8 camera works, lights/motors do not respond, servo twitches 12 May 31, 2016
What is the i2c mode of OpenROV 2 May 20, 2016
Mounting thrusters to makerbeam 3 May 17, 2016
Further thruster engine for manipulator/grabber 2 May 16, 2016
Logitech c920 watermark 3 May 12, 2016
Some questions about ESCS 2 May 11, 2016
Why are battery pods not wired in parallel? 4 May 10, 2016
Why does OpenROV uses both beagle-bone and the controller board 6 May 9, 2016
USB Infra red camera 4 April 5, 2016
Help with IMU Problems 1 March 22, 2016
How to get depth perseption by using two cameras 4 March 20, 2016
About tenda p202 and pa202 homeplug 2 March 8, 2016
[SOLVED] Beaglebone boneheaded and backwards 9 March 14, 2016
Electronics for external lights 10 March 4, 2016
Keyboard, game pad, joy stick -and the winner is? 2 February 27, 2016
[SOLVED] Camera wire jumper 4 February 24, 2016
More Servos on the ROV 5 February 19, 2016
Two for Two. Replaced Beagleboard with new and then stops working 7 February 11, 2016
How does the board manage reverse direction? 2 February 2, 2016
OpenROV IMU/Compass/Depth Module‏ 1 January 25, 2016
Short range wire based energy supply 4 January 21, 2016
IMU sensor on new ROV 6 January 18, 2016
Connecting to a different ROV? 3 January 14, 2016
SOG (speed) wich is? 3 January 1, 2016
Troubleshooting: Get voltage to the onboard Tenda 3 December 20, 2015
IMU is dead and only port side LEDS working 30 November 28, 2015
Power distribution circuit 1 November 25, 2015
Rugged depth sensor 2 November 13, 2015
How to clean the motors? 2 November 3, 2015
LiFePO4 Battery from All-Battery 2 November 1, 2015