ROV Builders   Electronics


Topic Replies Activity
ArduSub and two cameras 2 July 5, 2017
ESC Calibration Arduino 10 June 30, 2017
Make the motors slower 2 June 7, 2017
Beaglebone problem? 8 May 29, 2017
Wire color coding for OpenROV 2.8 2 April 30, 2017
Devolo homeplugs 3 April 18, 2017
What are ESCs used for in ROVs? 7 April 9, 2017
How to utilise pwm4 for extra external lights 2 February 23, 2017
ESC Calibration Erratic, Calibrated Correctly 13 February 10, 2017
Controller Board Mod for 6 ESCs 11 December 18, 2016
Tenda powerline mini adapter actual transfer speed 3 December 6, 2016
Video Goggles adapter from a PC or laptop needed 5 October 15, 2016
Thunder Tiger Neptune SB-1 8 October 2, 2016
Raspberry Pi Camera attachment announced 4 November 30, 2012
Correct chassis orientation of the IMU/Depth Module 2.0 3 August 29, 2016
Openrov topside interface board 1 July 27, 2016
Problems about the IMU Module v2 15 July 24, 2016
Code for the Servos 11 July 22, 2016
Motors didn't rotate when I burnt my own code to controller board 1 July 22, 2016
Using extra servo control to control a strafe thruster 55 July 19, 2016
Is it possible to connect the arduino in the controller board directly to arduino IDE? 1 July 16, 2016
ROV Peak and Constant Current Draw 10 June 20, 2016
Use caution with batteries from Ebay or Amazon 1 June 14, 2016
Second servo pan and tilt 3 June 14, 2016
Communication between computer and ROV 1 June 12, 2016
Black screen on dashboard -- camera? 3 June 12, 2016
Second Camera suggestions 3 June 10, 2016
Battery pack for ROV 7 June 8, 2016
IMU V1 Schematic 15 May 17, 2016
2.8 camera works, lights/motors do not respond, servo twitches 12 May 31, 2016