ROV Builders   Project and Build Discussion


About the Project and Build Discussion category (1)
OpenROV Gripper, Grabber, Manipulator ( 2 3 4 ) (73)
DIY 3 Thrusters ROV Build Log (2)
Affordable gripper / grabber / manipulator ( 2 ) (21)
Dual Vertical Thrusters (2)
Is there a better way to attach the tether to the Tenda adapter? (4)
Blue Robotics/OpenROV 2.8 Hybrid ROV ( 2 3 ) (52)
ZORROV-IV build (8)
Red October- MATE Competition ROV (11)
Reinforcing the tether (3)
AutoSpool: Automatic Tether Management (7)
Has anyone built a plug so the rov could be detached from the tether/cord? (5)
ROS Integration via roslibjs ( 2 ) (30)
Ballast system for rov (2)
GoPro underwater Structure from Motion (SfM) / Photogrammetry ( 2 3 ) (48)
CTD+ (Conductivity, Temperature, Depth, Light) - From the Breadboard to the ROV ( 2 ) (31)
Claw wiring problems (4)
ZORROV-V Openrov ROV Derivative (7)
360 degree camera (7)
Rov competition advice (3)
Hard wire for power instead of batteries on the 2.8 (2)
Power over two wire tether, still viable? (3)
Magnetic coupled grabber / first working prototype ( 2 ) (23)
Substitute for acrylic cement (6)
Center of mass & center of buoyancy analysis (12)
Battery tube failure (2)
OpenROV 2.8 Developer's Controller Kit (20)
WiFi buoy for OpenROV 2.8 testing (3)
Cheap manipulator using car door lock actuator (3)
IMU won't stay glued to ROV: OpenROV #3251 (9)