OpenROV Product Support   Add-ons / Accessories


About the Add-ons / Accessories category (1)
50 - 60m Tether OPTION on a std spool, can we have one (5)
BR neutrally buoyant twisted pair tether (1)
Water protection for JXD Controller? (2)
IMU Module Setup (2)
Adding Temperature Sensor (4)
IMU Calibration (compass and tilt) ( 2 3 ) (48)
New IMU or not? (5)
IMUTestArduino FAIL (1)
IMU Dead on arrival (2)
Small air bubble under the IMU Module PWB (14)
Checking The IMU (1)
I can't get the IMU working (19)
Mock Dev enviroment for desktops (9)
Using a Humminbird Side Scan Sonar not to the bottom but to ahead of the ROV (2)
[SOLVED] Will the new high res camera fit V2,6? (5)
[SOLVED] Light cubes not working (7)
Alternate camera: latency fluctuates dramatically (4)
How to collected date from IMU (4)
Camera upgrade kit optics/resolution options (5)
Xbox 360 controller: no deadzones and laggy response (2)
Correcting roll on IMU (4)
When will the underwater servo be avaialbe? (2)
V2.6 - 2 sets of light cubes (2)
Where does the OpenROV cockpit browser retrieve IMU data (2)
IMU Problem no data (13)
HD Camera Picture Blink[opennrov v30.0.3] (9)
BN055 and MPU9150 (8)
External Light cube using Arduino (3)
Get the IMU data from a IP address in real-time (3)